"The 5" Headphone Under Desk Hanger, Single

If you're looking for the dual version, here it is.

I decided to make this hanger from scratch after a few iterations that needed refinement, I saw there aren't many headphone hangers designed for multiple types of desks, so I decided to make one myself!

Required Parts

• 1x Hanger (Thin Desk or Thick Desk)
• 1x Screw (Short or Long)
• (OPTIONAL) 1x Spacer (Long or Short)
• (OPTIONAL) Adhesive Rubber

Assembly

Choose the parts you need, the “Thin Desk” Hanger fits desks as thick as 35mm, while the “Thick Desk” Hanger fits desks as thick (haha) as 55mm.

The assembly process is very easy, you just need to print the parts, screw them together and voilà! After putting it on your desk (Make sure the parts you chose fit your desk) you just need to put your headphones to sleep!

Note: In case you want to put the adhesive rubber on the print, make sure you're covering the right areas (Should be top area of the hanger, the one that grips on the desk, and on top of the spacer, just to be sure it's not gonna slip away)

Recommended Materials

I'd recommend using a strong material like PETG, but any type of PLA (Not sure about silk) should work.

Any ideas? Be sure to leave a comment and I'll read it as soon as possible!