0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2026-10-31 05:00:09
363
17
Report

💀 Four skulls, one cone, a river of smoke

@IlkekkoLab_4847706
Message
Follow
Description

 💀 Four skulls, one cone, a river of smoke.


 A gothic stone fountain for backflow incense cones. Place a cone on top: the smoke sinks into the

 ornate flask, splits into four equal channels and pours out of the open jaws of four skulls, flowing

 down into the fountain basin like a ghostly waterfall.


 ⚙️ HOW IT WORKS

 • The cone sits on the amphora-shaped top, on a metal washer glued to it (the washer protects the

 plastic from the heat)

 • A 5 mm hole leads the smoke into a small spherical chamber inside the flask

 • The chamber divides the smoke into 4 hidden channels (5 mm), all joining the sphere at the same

 height, so every skull gets its share

 • The channels run down inside the stone block and open into the skulls' mouths

 • Everything goes downhill: no fans, no tricks, just gravity


 📦 WHAT'S INCLUDED

 • 2 STL parts: fountain top (flask, arches, skulls) and base (basin with column)

 • Simple box joint: the base has a 20 × 20 mm peg that fits into the socket under the top


 📏 SIZE

 • About 150 × 150 × 133 mm assembled

 • Top: 74 × 74 × 90 mm. Base: 150 × 150 × 50 mm (fits a 256 × 256 mm bed)


 🔩 YOU ALSO NEED

 • 1 metal washer, about 16 mm outer diameter (M8): the only part to glue, on the 15 mm flat top

 • Backflow incense cones

 • No glue needed for the two parts: the top simply slots onto the base (a drop of glue only if you

 want it permanent)


 🖨️ PRINTING

 • Print profile included: it's the one I used for the fountain in the video, so just load it and

 print. If you change settings, keep an eye on the supports (see below)

 • Both parts print upright on their flat bottom: the top on its square base, the base on the basin

 floor

 • Supports only for the skull jaws, the arches and the gargoyles. Check the sliced preview: no

 supports must end up inside the smoke channels

 • PLA works; PETG is better if your room gets warm. The cone never touches the plastic thanks to the

 washer


 🔥 TIPS FOR A NICE SMOKE FLOW

 • Put the cone right on the hole and keep the burner away from drafts, fans and open windows

 • If one skull smokes less, blow gently through the top hole: dust or a print string may be blocking

 the channel

 • Clean the channels from time to time: incense resin slowly builds up inside


 ⚠️ Never leave burning incense unattended. Place the fountain on a heat-resistant surface, away from

 children, pets and anything flammable.

Tags
incense
incense burner
backflow
backflow incense
incense holder
holder
incense waterfall
waterfall
smoke
smoke fountain
skull
gothic skull
gothic fountain
deco
home deco
home
burner
witchy
cone incense
halloween
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.