10 minute benchy - Kobra S1 (Flowtech hotend)

Warning: Do not try this with stock or Aliexpress hotend. You'll likely break your extruder.

Print Settings:

• Outer: 300mm/s - 10kmm²/s
• Inner: 600mm/s - 20kmm²/s
• Max volumetric speed: 55mm³/s
• Layer height: 0.25mm
• Top/Bottom: 3 Layers
• Infill: 10% Lightning
• Min layer time: 0.7s
• Filament: eSun PLA+
• Extruder Temp.: 230°C

What you need to print this safely:

• Microswiss Flowtech hotend
• Magnum printhead cover
• Flowtech optimized fan duct

Full 10m Video