10-inch Rack Mount for Elecrow 5-inch display
A 2U 10-inch rack mount adapter for the Elecrow 5-inch touchscreen display (SKU: DIS05490T). This display has a standoff for a single Raspberry Pi (Models 2, 3, 4 and 5).
You can buy this screen in the following URLs:
The links above are affiliate links from Amazon and Elecrow. If you buy from one of them I get a small commission and you'll help me keep publishing new models for free! This won't cost anything extra for you.
I've made this mount in 4 variants:
- Plain adapter: Attach it with M3x10 screws coming from the front of the mount and secure it with hex nuts.
- Plain adapter with thread insert holes: Same as the first one, but with holes for short M3 thread inserts. This version you can secure the screen from behind, keeping the front of the mount clean.
- Keystone version: This version has 4 keystone slots, and you should attach the screen using M3x10 screws coming from the front of the mount.
- Keystone + Thread Insert version: Same as the keystone version, but with holes for short M3 thread inserts. This version you can secure the screen from behind, keeping the front of the mount clean.
The thread inserts used in this project have the following specs:
Required parts
- If using thread inserts:
- 4x M3x3 thread inserts.
- 4x M3x6 screws.
- If using regular versions:
- 4x M3x10 screws.
This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here.
Do you like my models? Consider buying me a coffee ;)
Print Settings
Supports:
No.
Resolution:
0.2 or 0.24
Walls/Perimeters:
4.
Infill:
15% or more.
Filament:
Any.
