2025-03-11 08:58:11
12.4k
1.2k
150mm spool adapter
@SMike_3770555
Donate
Message
Follow
Recommended printing method
Add
Kobra S1 PLA 0.20mm Layers
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 1h 39m 06s
230
Share
Description
See also these other sizes:
Measure the outer diameter before printing, so you will have the right one. You can also scale the model a bit to fit. Message me if you need help.
Use small spools in the ACE or AMU as a full-size spool!
- Small spool dimensions that this handles: OD = 150mm, Width = 38 mm, spool walls thickness = 4.5mm (other dimensions unimportant)
There are other adapters, but here is why this one is the best:
- grips the outside of the small spool
- wide stance in the ACE/AMU for best reliability
- A grippy tread on the outside of the spool means this works when printed with PLA (which is perhaps more slippery than other materials)
- steers the filament back onto the spool when retracting
- Provides a hole for the end of the filament to rest in
- Minimal material usage
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
