1:64 Farm Machine Shed / Barn — tractor shed for farm dioramas, plank relief

Generated with PrintHaus — size the shed to YOUR tractors

I generated this shed in my browser with PrintHaus, the parametric CAD generator for 3D-printable buildings that I develop. It is not an AI model — it is real parametric solid geometry, exported straight to print-ready files.

I set it up as an open-fronted hall with a mono-pitch roof, large doors and window openings, and exported at 1:64. If your collection is 1:32 or 1:87 instead, the same building comes out at that scale — that is the whole point of a generator.

▶ Try it free in your browser: printhaus.app

▶ PrintHaus is launching on Kickstarter — follow the pre-launch page. Following costs nothing and gets you notified the moment it goes live.

The model

A farm machine shed for 1:64 models, dioramas and display: a single open hall with big doors, side windows and a mono-pitch roof, sized so 1:64 tractors and implements park right inside. The walls carry real printed relief — the plank siding is modelled into the geometry, not a printed-on image. Roof, doors and windows print as separate parts.

Printing

Scale 1:64, base plate 121.8 × 153.0 mm. 15 parts, supplied both as 6 ready-to-slice Bambu Studio plates (.3mf) and as individual .stl parts converted 1:1 from those same plates — identical geometry, so any slicer works. 0.2 mm layer, approx. 14.3 h. Parts are pre-oriented flat, no supports needed. The colours are just my filament choices — swap freely.

More buildings from the same generator: Fortified Watchtower and Fortified Watchtower RUIN.