3D Printer Stilized Blueprint - Hueforge

3D Printer Stilized Blueprint - A little art not only for fans of 3d printing :-)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size. Changing the dimension in the X and Y axis in the slicer is possible. You just can't change the dimension in the Z axis.

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

    PLA Black Transmission Distance: 0.3

    PLA Blue Transmission Distance: 3

    PLA Gray Transmission Distance: 1

    PLA White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

    Start with Black

    At layer #10 (0.88mm) swap to Blue

    At layer #15 (1.28mm) swap to Gray

    At layer #20 (1.68mm) swap to White for the rest.