0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2026-02-22 19:36:39
793
20
Report

4A-GE 20V Inline-4 Engine Miniature

@BennyHuang_5807428
Message
Follow
Description

📌 Introduction | 项目介绍

This project is based on an original 3D scan model of the Toyota 4A-GE 20V engine, sourced from:

Bremar 3D Scan Store

https://www.bremar3dscanstore.com/cad-models/p/toyota-4age-20-valve-engine

本项目基于 Toyota 4A-GE 20V 发动机的三维扫描模型,原始扫描来源于:

Bremar 3D Scan Store

🔧 Model Modification | 模型重构与优化

The original scan model has been:

• Cleaned and remeshed

• Geometry corrected and simplified

• Surfaces refined for FDM printability

• Wall thickness adjusted

• Overhangs optimized

• Structural elements rebuilt

In addition, I redesigned and added:

• Separate intake trumpets

• Exhaust headers

• Display base

• Modular assembly structure

原始扫描模型经过以下处理:

• 网格清理与重构

• 几何修正与简化

• 表面结构优化以适配 FDM 打印

• 壁厚重新设计

• 悬垂角度优化

• 结构重建

并新增设计:

• 独立进气喇叭

• 排气头段

• 展示底座

• 模块化组装结构

This is not a raw scan upload — it is a mechanically adapted and print-optimized version.

本模型并非原始扫描文件的直接发布,而是经过打印优化与结构重构后的版本。

🖨 Printing | 打印建议

Layer Height | 层高:0.2mm

Infill | 填充:15–25%

Supports | 支撑:排气头段建议开启

Material | 材料建议:

• Silver filament for headers

• 排气建议银色或金属色

• Black for cam cover

• 气门室盖建议黑色

• White / Grey for block

• 缸体建议白或灰色

Resin printing will provide higher detail if preferred.

如使用光固化打印,可获得更高细节表现。

🔩 Assembly | 组装说明

⚠ Glue is required for final assembly.

⚠ 本模型组装必须使用胶水固定。

Due to fine components and printer tolerance variation, CA glue (super glue) is recommended.

由于结构精细且打印公差存在差异,建议使用瞬干胶固定。

Tags
engine
4age
carengine
License
This remix is based on