2026-01-01 05:11:39
8.6k
827
ACE PRO desiccant holder
@nparker76_4508567
Donate
Message
Follow
Recommended printing method
Add
ACE Pro Desiccant Pack_S1 size; 0.4mm nozzle; 02mm layer height
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 2 Plus
、
Kobra 2 Neo
、
Kobra 2 Pro
、
Kobra 2 Max
、
Kobra 3 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:2
/ 7h40m
150
Share
Description
Just another desiccant holder for the ACE Pro. I previously had individual separate holders, that I knocked over a few times when changing filament rolls. I got tired of cleaning up the mess, so I made this holder that is a little more robust. Uses the standard cheapo temp/humidity sensor. Made to be printed on a 250x250 or bigger machine, so the Kobra S1 will work. I designed this where the holes are printed in a continuous weaving pattern, and the printer doesn't start/stop at each hole.
Supports will be needed on the bottom overhang, but they are not needed anywhere on the top half.
Print in PTEG, ABS, etc. (PLA could potentially warp when heated in the ACE).
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Comments & Ratings
Here is empty
Remixes
