Description
🛠️ Technical Specifications
Wingspan: 700 mm
Length: 436 mm
Wing Area: 13.37 dm²
📦 Hardware & Reinforcement Required
Main Wing Spar: 6mm x 500mm Rod (1x)
Secondary Wing Spar: 6mm x 250mm 1x)
Elevon Control Rods: 3mm x 300mm (1x)
⚙️Printing Settings
Layer Height: 0.28 mm
Wall Loops: 1
Top Shell Layers: 3
Bottom Shell Layers: 2
Sparse Infill Density: 3–4%
Sparse Infill Pattern: Cubic
📊 Weight Breakdown & Specs
• Filament Weight (PETG): 240g – 300g Max
• Electronics Payload: ~485g – 500g
- 6S Battery: ~350g
- 2806.5 Brushless Motor: ~50g
- ESC: ~70g
- Flight Controller: ~20 g
- 2x Mini Servos: ~20g
- GPS Module: ~20g
_________________________________________________
Update (18/11/2026)
1 - Updated the Vertical Stabilizer.
2 - Updated the airfoil profile
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
