Adaptable Jig for iPhone 14 Plus protective glass installation

This is Jig for the correct installation of protection glass.

I designed it to be adaptable in base of the glass you are going to install (they are NOT all the same perfect size!)

Instructions:

1. Before print the jig, check you Tempered Glass size with a Caliper (length and width) and write the down.
2. 
3. Open the .3mf file of your iphone model and select the negative part in the centre of the bed.
4. 
5. Resize the negative part in x and y (remove the flag on "uniform scale) with the measurement of you glass ( you wrote down in step 1) following this formula:
6. measure(x) + 0.3 and measure(y) + 0.3
7.  
8. Now SLICE and PRINT!