I've created an adapter that allows you to combine the SONOFF SNZB-01P push button with Kopp's switch range.
You'll need a Kopp blanking plate and a Kopp frame (e.g. a Kopp single frame).
The original cover is replaced by this model. I am using this with the HK05 series, in principle, this model should also be usable with other series that accept 50x50 mm inserts.
Print with 100% infill, preferably using PLA+.
The base plate is glued to the back of the frame (small notches are provided for correct alignment). The push button's metal backplate is then screwed onto the base plate.
The first picture shows the fully assembled switch. The second image shows the Kopp blanking plate on the left and the adapter with the metal backplate of the button mounted on the right.
---
Ich habe einen Adapter erstellt, der es erlaubt den Taster SONOFF SNZB-01P mit dem Schalterprogramm von Kopp zu kombinieren.
Benötigt wird eine Kopp Blindabdeckung und ein Kopp Rahmen (z.B. ein Einzelrahmen).
Die eigentliche Abdeckung wird durch das Modell hier ersetzt. Ich verwende es mit der HK05 Serie, grundsätzlich sollte das Modell aber auch in anderen Serien, die 50x50 mm Einsätze zulassen, verwendet werden können.
Gedruckt wird 100% Infill und vorzugsweise mit PLA+.
Die Grundplatte wird auf die Rückseite des Rahmens geklebt (zur korrekten Ausrichtung sind kleine Kerben vorhanden). Die Metall-Rückplatte des Tasters wird dann auf die Grundplatte geschraubt.
Das erste Bild zeigt den komplett montierten Schalter. Das zweite Bild zeigt auf der linken Seite die Kopp Blindabdeckung und auf der rechten Seite den Adapter mit montierter Metall-Rückplatte des Tasters.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
