2024-08-05 04:58:52
5.1k
325
Adjustable graphic card holder bracket ASUS TUF
@Cstibikeee_3453412
Donate
Message
Follow
Recommended printing method
Add
Adjustable graphic card holder bracket ASUS TUF
Kobra S1
Kobra 3
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
/ Plates:2
/ 1h35m
82
Share
Description
Min. height 66 mm
Max height 113 mm
No support need.
Instructions:
The TUF logo should be printed flat with a layer height of 0.2 mm.
I coloured the part above the bar in the middle yellow.
The adjustable inner rod is printed separately with a layer height of 0.12 to make the thread easy to rotate.
An 8x2 mm magnet can be placed in the bottom.
On a flat surface, push the magnet in to make it nice and flat. Minimal superglue can go into the hole.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Comments & Ratings
Here is empty
Remixes
