Advent calendar modular Christmas tree

Advent calendar modular Christmas tree, for your loved ones

With honeycomb modules that can be individually assembled and decorated.

New version: No more connectors necessary, the honeycombs are simply clicked together. New decoration with handy, numbered buttons. 3 different container sizes

The advantages at a glance:

• Small individual parts, printable on all 3D printers
•  
• Containers are printed with only one wall, therefore low filament consumption, little printing time required
•  
• The decoration is freely selectable
•  
• You can sort or mix the figures
•  
• Large containers in 3 different sizes, for big surprises. The containers can either form a flat surface at the front or at the back, depending on whether you stand the calendar up or hang it on the wall.
•  
• Individual shapes can be created with the honeycombs, from Christmas trees and frames to rectangles or rows
•  
• Non-destructive opening, everything is reusable
•  
• The Advent calendar can be laid, placed or hung up
•  
• When disassembled, it can be stored to save space
•  

Printing instructions:

The tin and lid are printed with a standard 0.4 mm nozzle, but with a wall thickness of 0.6 mm (already configured in the print profile).

For all other parts, simply use the standard settings.

Required amount of filament: Approx. 600 g

You need to print:

23 x can

1 x can with hole

24 x lids

each number once

Decorations as desired, 24 x

I used PETG for the containers. PLA is not recommended as the layer adhesion leads to instability and the lids are somewhat more difficult to open.