African Elephant Hueforge

No need for an AMS, Just change color at layer.

Both STL and Bambu Studio profile is uploaded.

Any of my 200 x 200 Frames can be used. Just glue them together.

Please "Like", review, follow and upload make.

Commercial license

As of 2/25/24 my designs are no longer allowed to be sold commercially.

Do you want to sell prints of this model or any of my models? You can purchase commercial licensing at Patreon or Buy Me A Coffee. Earring Commercial License is just $3 a month. A full commercial license for all of my designs is just $7 a month.

Print Instructions

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:PETG JAYO Black Transmission Distance: 0.3PLA BambuLab Matte Dark Red Transmission Distance: 1.5PLA BambuLab Basic Pink Transmission Distance: 8PLA BambuLab Basic Orange Transmission Distance: 5PLA BambuLab Matte Mandarin Orange Transmission Distance: 3PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Matte Lemon Yellow Transmission Distance: 4

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:Start with BlackAt layer #10 (0.88mm) swap to Dark RedAt layer #19 (1.6mm) swap to PinkAt layer #20 (1.68mm) swap to OrangeAt layer #22 (1.84mm) swap to Mandarin OrangeAt layer #24 (2mm) swap to YellowAt layer #25 (2.08mm) swap to Lemon Yellow for the rest.