Hi!
I'm happy to present my new project - the Air Rocket Toy, a press-to-launch air rocket that's perfect for kids (and not only them). 🙂
It took a lot of work - I designed it completely from scratch. There are many toys of this type out there, but this one is built for maximum launch power. The air channel is optimized for the highest possible pressure, with just enough margin for the button to work smoothly. I also accounted for the compression of the lower layers during printing and for the button lock. With a light press the rocket flies at least 2 meters; with a strong press it easily goes over 4 meters - even with the guide tube.
What's included
- Launcher
- Cap
- Spring
- Rocket (x3)
- Angle tube - lets you adjust the flight direction, perfect for aiming at a target
Assembly
- The spring can be glued at the top and bottom, but it's not necessary. It works fine without glue - it may only fall out when the toy is turned upside down.
- The spring's gluing surface is intentionally a bit looser to make mounting and gluing easier.
Print settings
- Nozzle: 0.4 mm
- Material: PETG (PLA also works)
- Layer height: 0.20 mm
- First layer: 0.22 mm
- Walls: 2
- Infill: 15%
- Supports: no - don't add supports to the rockets, even if the slicer suggests it. The irregular internal shape is intentional and gives better pressure.
- Brim: no
- Orientation: as in the project file
- Print time: 4 h 24 min · Filament: 121 g (all parts on one plate)
Depending on your printer's precision, the result may vary slightly.
If you can, please appreciate my work and give it a like, leave a comment - it will make me very happy :).
Enjoy and have fun!
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
