Angwatt CS1 Turn signal holder (electric scooters)

Turn signal holder for Angwatt CS1 electric scooter.

The holder is suitable for mounting turn signals from various markets such as Temu, aliexpress etc...

(FY-1820,.....)

Mounting on the fender holder of the Angwatt Cs1 electric scooter

(shown in the photos)

Original screws from Angwatt can be used (or alternative ones in the same size)

I do not recommend using Pla, it is not suitable for such things,

my print is from Petg for its easy printing on all printers.

(if someone has the opportunity to print from better and more durable materials it is only a plus)

basic settings:

Nozzle 0.4

Layer 0.2

95-100% infill Gyroid (6-8 perimeters for the holder.)

95-100% infill Gyroid (4 perimeters for the rudder locking screw.)

Tree Supports on

recommendation:

when driving off-road, the holder can make dull sounds from impacts, so it is advisable to isolate it mainly at the rudder attachment point with rubber, neoprene tape, etc. to limit larger vibrations.