Angwatt F1/C1 Turn signal holder etc....

Turn signal holder for Angwatt F1 and similar electric scooters.

The holder is suitable for mounting turn signals from various markets such as Temu, aliexpress, etc.

(FY-1820,.....)

Mounting above the fender of the Angwatt F1 electric scooter and similar ones. (shown in the photos)

Original screws from Angwatt can be used (or alternative ones in the same size)

I do not recommend using Pla, it is not suitable for such things,

my print is from Petg for its easy printing on all printers.

(if someone has the opportunity to print from better and more durable materials it is only a plus)

basic settings:

Nozzle 0.4

Layer 0.2

95-100% infill Gyroid (8 perimeters for the holder.)

95-100% infill Gyroid (4 perimeters for the rudder locking screw.)

Tree Supports turned on (already manually set in the profile)

recommendation:

when driving off-road, the holder can make dull sounds from impacts, so it is advisable to isolate it mainly at the rudder attachment point with rubber, neoprene tape, etc. to limit larger vibrations.