2026-08-25 17:47:20
148
0
Animal coaster set
@MrAtara_4434953
Donate
Message
Follow
Recommended printing method
Add
Animal coaster set
Kobra 3 V2
Kobra S1 Max
、
Kobra 3
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 Max
/ Plates:2
/ 14h45m
0
Share
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Can be printed with manual filament change only (setting filament change or pause in the slicer). No automatic material system required.
All coaster are 100x100mm in size.
You may print at higher layer heights below the Base Thickness of 0.48mm. The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.4mm.
PLA Anycubic Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Anycubic White Transmission Distance: 6,5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #18 (1.52mm) swap to White for the rest.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
