Annoying box, perfect gift box 56 srew, screwdriver

Perfect gift packaging for your friend (56 screw). Screwdriver included.

!!!!!!!!!!!!!! If there is any problem with screwing in the screw, first screw in the M8 metal screw which will correct all errors in our printers!!!!!!!!!!!!!

I printed on a 0.6mm nozzle, if you print on 0.4mm it is very likely that you can use a higher layer

Print settings:

models:

box, cap, case_part_1, short_screw, long_screw

layer heihgt: 0,12mm (if you use 0,4mm nozzel probably can you use bigger layer)

supports: NO

infill: 5%

models: cup, case_part_2

layer height: 0,2mm-0,24mm (if you have good cooling you can try use bigger height)

suports: NO

infill: 5-15%

models:

screwdriver

infill: the more the better

supports: NO

layer height: at your discretion

If you have a problem, please DM me