Description
My simple version of a Z Belt Tensioner for the Anycubic Kobra 3.
Its held on the Aluminium Extrusion by friction, so the model might seems tight but it does fit. The photos are after about 20+hrs of use & the Z Tensioner is still solid in place.
The model was based on the spare pulleys I had laying around, with 1 being a teeth pulley using an M3 screw & the other a non-teeth pulley using an M4 screw.
Each screws using washers & nuts. I use a nut to keep the pulley in place & with the M4 screw I printed washers since I didn't have any to fit. Can see photos.
Tags
License
