Anycubic Kobra S1 Nozzle wiper

Donate

Message

Recommended printing method

Print Profile Files (1)

Raw Model Files (2)

Add

Designer

/ Plates:1

/ 13m 30s

Description

* Checkout new Twins wiper version here:

---

Anycubic Kobra S1 replace stock nozzle wiper with Silicone wiper pad size 14x6x6mm

The silicone pad will improve nozzle wipe perfomance than the stock wiper.

Silicone wiper pad 14x6x6 (for P1S/X1)

(The link is for reference, you can buy from any shop with a good reviews or find it on amazon)

High temp resistant filament PETG, ABS is recommended

Can printed without supported / Standard 0.4 nozzle / 0.2 layer high

Note:

V1.2 Silicone socket size 14x6 Depth 2.2 mm

V1.3 Silicone socket size 13.8x5.8 Depth 2.9 mm

*Due to actual silicone size is a bit smaller than spec 14x6 then I add V1.3 with a bit smaller socket to fit actual silicone size