2025-12-06 15:12:55
1.2k
10
Anycubic S1 Roller Upgrade/Mod
@ryanr_4923132
Donate
Message
Follow
Recommended printing method
+ Frequently Used Printer
ROLLER_INSERT.stl
150.96KB
1
ROLLER_INSERT_PLA_0.1_17m13s.gcode.3mf
134.24KB
IPT
ROLLER_INSERT.ipt
187.50KB
3
Share
Description
This is to upgrade your OEM filament rollers in the Anycubic Ace Pro machines to allow 250g spools with adaptor side plates to roller smooth. The OEM comes hollow in the middle. This is a quick/cheap way to make them whole again. No need for bearings, new shafts, or new rollers to be printed. Print this insert, clean the ID with a 1/8" drill bit and assemble. Each is about a 14min to print. They spin smooth and fast.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Documentation
setttings.png
199.92KB
Comments & Ratings
Here is empty
Remixes
