Arbor Dream

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x200mm in size. You can change X and Y but Z must remain the same.

 You may print at higher layer heights below the Min Depth of 0.48mm

 Actual Depth is 2.3mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Blue Gray Transmission Distance: 3

PLA BambuLab Basic Jade White Transmission Distance: 4.8

PLA BambuLab Basic Blue Transmission Distance: 4

PLA BambuLab Matte Ice Blue Transmission Distance: 3.5

This print uses 5 unique filaments. Substitute as needed.

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Blue Gray

At layer #11 (0.96mm) swap to Jade White

At layer #17 (1.44mm) swap to Black

At layer #19 (1.6mm) swap to Blue

At layer #22 (1.84mm) swap to Ice Blue

At layer #25 (2.08mm) swap to Jade White for the rest.