Arthur Morgan RDR2 Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 250x196.65mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA Sunlu Meta red Transmission Distance: 7PLA Prusament Lipstick Red Transmission Distance: 3.3PLA PolyLite White Transmission Distance: 5This print uses 4 unique filaments

Swap Instructions:Start with BlackAt layer #10 (0.88mm) swap to redAt layer #14 (1.2mm) swap to Lipstick RedAt layer #17 (1.44mm) swap to White for the rest.