Arthur Morgan wallpaper Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 193.53x250mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA Prusament Lipstick Red Transmission Distance: 3.3PLA Kingroon Skin Transmission Distance: 3.7PLA PolyLite White Transmission Distance: 5This print uses 4 unique filaments

Swap Instructions:Start with BlackAt layer #10 (0.88mm) swap to Lipstick RedAt layer #14 (1.2mm) swap to SkinAt layer #19 (1.6mm) swap to White for the rest.