2024-07-10 23:44:10
56.2k
8.8k
Articulated Shark
@McGybeer_1848244
Donate
Message
Follow
Recommended printing method
Add
Shark-S1
Kobra S1
Kobra 3
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
/ Plates:1
/ 1h 09m 50s
Kobra s1
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 1h 05m 07s
1.4k
Share
Description
No supports required. Just slice and print!!
4 Versions available:
- Shark_v4_A.stl: Original design, movable jaw
- Shark_v4_B.stl: Friendly face, movable jaw
- Shark_v4_C.stl: Original design, NON-movable jaw
- Shark_v4_D.stl: Friendly face, NON-movable jaw
Design updated to v4 for a tighter tail joint
The non-movable versions are intended for children, as teeth are quite sharp. Or just in case you have trouble printing the movable one.
Best results if you use a thin layer resolution (0.16 mm works perfect)
After printing, the tail and the jaw should get free with a little force: https://youtu.be/14z1ll9yMmU
Then just enjoy it, even in the water!! https://youtu.be/E1W-RyH8bGA
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Comments & Ratings
Here is empty
Remixes
