0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-04-24 00:51:28
444
13
Report

Asian landscape

@fD667_1053716
Message
Follow
Recommended printing method
Description

It is possible to print without material system by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.


 The Model is 133x200mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 2.2mm


Filaments Used:

PLA PolyTerra Charcoal Black Transmission Distance: 0.3

PLA PolyLite Natural Transmission Distance: 21

PLA Overture Matte Light Brown Transmission Distance: 0.6

PLA BambuLab Basic Yellow Transmission Distance: 6

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 5 unique filaments


Swap Instructions:

Start with Charcoal Black

At layer #8 (0.72mm) swap to Natural

At layer #19 (1.6mm) swap to Light Brown

At layer #20 (1.68mm) swap to Yellow

At layer #24 (2mm) swap to Jade White for the rest.

Tags
japan
asian
landscape
hueforge
decoration
sun
mountaing
deco
3dart
aiart
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.