0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-01-05 09:59:19
1.9k
102
Report

Bügelbrett Wandhalter - Ironing board wall bracket

@CheetahLab_4546597
Message
Follow
Recommended printing method
Description

Bügelbrett Wandhalter


Für unser Bügelbrett habe ich einen Wandhalter konstruiert, auf dem das Bügelbrett mit der ersten Querstrebe (Rohrdurchmesser max. 20mm) eingehängt bzw. eingelegt werden kann - der obere Teil funktioniert quasi wie eine Rutsche. Auf eine Hakenlösung habe ich bewusst verzichtet, da die Haken abbrechen können - beim Einhängen wie auch beim Herausnehmen, wenn man nicht aufpasst. Da das Bügelbrett auf der Unterseite diverse Aufbauten hat (Steckdose, etc.) musste das Brett ca. 6cm von der Wand frei hängen. Die Breite der Halterung beträgt 8cm - genau die Breite des Querstegs vom Bügelbrett. Vermutlich kann die Halterung auch noch für ganz andere Anwendungsfälle genutzt werden.


Den Halter habe ich mit PETG gedruckt und ist für maximal 6 Schrauben a´ 4x35mm Senkkopf oder länger vorgesehen. Die Funktion des Halters ist nach mehreren Belastungstests vollkommen gegeben. Vorteil durch die Halterung: das Brett reibt nicht mehr an der Wand und unter dem Bügelbrett kann einfacher sauber gemacht werden 😁


Wünsche Dir viel Spaß beim Drucken und falls Du ein Like, Kommentar oder sogar ein Make da lassen würdest, würde mich das sehr freuen... 😉



Druckeinstellungen

  • 0,2mm Layerhöhe
  • 2 Wände, Wandgenerator: Arachne
  • Z-Naht: Rückseite
  • 25% infill, Gitternetz oder Kreuzschraffur, Infill kombinieren
  • Umrandung aktivieren, falls Du Haftungsprobleme hast (bei mir war es nicht nötig)
  • Supports sind nicht nötig, PETG oder höher empfohlen




Ironing board wall bracket


For our ironing board, I have constructed a wall bracket on which the ironing board can be hung or inserted with the first cross strut (tube diameter max. 20 mm) - the upper part functions more or less like a slide. I deliberately chose not to use a hook solution, as the hooks can break off - both when hanging in and when removing if you are not careful. As the ironing board has various attachments on the underside (socket, etc.), the board had to hang freely approx. 6 cm from the wall. The width of the bracket is 8 cm - exactly the width of the crossbar of the ironing board. Presumably the holder can also be used for completely different applications.


I printed the holder with PETG and it is designed for a maximum of 6 screws with a 4x35mm countersunk head or longer. After several load tests, the holder is fully functional. The advantage of the holder is that the board no longer rubs against the wall and it is easier to clean under the ironing board 😁


Have fun printing and if you would leave a like, comment or even a make, I would be very happy... 😉



Print settings

  • 0,2mm layer height
  • 2 walls, wall generator: Arachne
  • Z-seam: reverse side
  • 25% infill, grid or cross hatch, combine infill
  • Activate border if you have adhesion problems (I didn't need to)
  • Supports are not necessary, PETG or higher recommended



Tags
Ironing board
Bügelbrett
Buegelbrett
Halter
Wandhalter
Wallmount
wall mount
bügeln
buegeln
Halterung
Aufhänger
wall bracket
ironing board holder
ironing board hanger
Haushalt
Aufhängung
wall holder
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.