BB8 "Star Wars" HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x200mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 1.6mm

Filaments Used:

PLA Smart Recycled Black Transmission Distance: 0.5

PLA smartfil marron Transmission Distance: 5

PLA Smart Recycled Gold Transmission Distance: 0.5

PLA Smart Recycled White Transmission Distance: 5.7

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to marron

At layer #7 (0.64mm) swap to Gold

At layer #13 (1.12mm) swap to White for the rest.