BIG OWl hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x200mm in size

 You may print at higher layer heights below the Base Thickness of 0.48mm

 The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.67998mm

#080a0d PLA Anycubic Black Transmission Distance: 0.3

#e2dedb PLA Anycubic White Transmission Distance: 5

This print uses 2 unique filaments

Swap Instructions:

Start with Black

At layer #9 (0.84mm) swap to White for the rest.