0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2026-11-21 18:58:06
15
0
Report

Biba Type - Led Lamp

@Sparks3D_2957503
Message
Follow
Recommended printing method
Description

Biba Type is a modern table lamp with a circular silhouette and a soft, atmospheric glow. A 59.5 mm LED puck sits inside the head, while a disc suspended in front of it directs the light around the opening.

Assembled size: 140 × 50 mm footprint; 190 mm total height.



Parts to print

  • Body: 140 × 190 × 50 mm. Print lying on its back, with the front facing up, without supports.
  • Lampshade: A cone, Ø 124 mm and 1.2 mm thick, with a bayonet fitting that locks into the body.
  • Front disc: Ø 90 mm. It mounts in front of the LED using three tabs. Print face down with tree supports enabled.
  • Cable clip: 14 × 12 mm. It snaps sideways onto a spoke at the back and holds the cable in its channel.



Print settings

  • Nozzle: 0.4 mm
  • Layer height: 0.2 mm
  • Material: PLA
  • Infill: 10–20%
  • Supports: only for the front disc; use tree supports


What you need

A circular LED puck, Ø 59.5 × 8 mm. It press-fits into the lamp: no screws or glue are needed.


Assembly

  1. Push the LED puck into the collar from the front. It passes the three retaining tabs and rests against the ring at the back, with its face almost flush with the opening. Feed the cable through the large hole at the rear.
  2. Snap the cable clip sideways onto a rear spoke, then press the cable into its channel.
  3. Lower the lampshade into the front opening. Its central hub fits over the LED collar; turn it fully to engage the bayonet fitting. The outer edge settles against the conical seat.
  4. Pass the front disc’s three tabs through the slots around the hub, then turn the disc until you feel resistance. The tabs and their seats follow a helical path, tightening as you turn. Do not force it.


The front disc remains suspended 23 mm in front of the LED, allowing light to shine all around it.

Tags
led
lamp
led lamp
led light
light
lighting
lampshade
table lamp
home
home decor
modern
modern design
circular
License