Bill Cipher Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 93.87x100mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.3

PLA+ Sunlu Coffee Transmission Distance: 3

PLA+ Sunlu Pure Yellow Transmission Distance: 5

PLA+ Sunlu White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #9 (0.8mm) swap to Coffee

At layer #16 (1.36mm) swap to Pure Yellow

At layer #24 (2mm) swap to White for the rest.