Blubby - Fuzzy Table Lamp

Blubby is a table lamp composed of a lampshade and a base, held together by two threaded rings and designed for an E14 threaded sleeve lamp holder.

To print Blubby, in addition to the included 3MF printing profile, you can follow these steps:

Import into the slicer the lampshade model.

Add, as a part on the same lampshade model, the file Lampshade Fuzzy Effect (Add part) corresponding to the previously selected lampshade version.

Recommended printing parameters:

General

• Nozzle 0.4
• Layer height 0.2
• Wall order inner/outer/inner

For the lampshade

• Infill density 100%

For the overlaid Fuzzy effect

• Infill density 0%
• Wall loops 1
• Enable Fuzzy
• Fuzzy skin on all walls
• Fuzzy point distance 0.8
• Fuzzy thickness 0.8

To achieve the visual effect shown in the images, eSUN PLA Clear Green was used.

To complete the lamp, you need to add an E14 threaded lamp holder with power cable.