Boba Fett / Slave 1 Star wars 2/3 hueforge

Project: boba fett new.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 142.94x200.2mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA smartfil blackTransmission Distance: 0.4

PLA smartfil gris Transmission Distance: 0.8

PLA smatfil White Transmission Distance: 6

This print uses 3 unique filaments

Swap Instructions:

Start with black

At layer #13 (1.12mm) swap to gris

At layer #16 (1.36mm) swap to White for the rest.