2024-10-19 00:05:33
3.7k
496
Bottle opener three sizes
@vkobz_1020444
Donate
Message
Follow
Recommended printing method
Add
PLA/PLA+ - 0.2mm layer height - 0.08mm height clearance
Kobra 3 Max
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 2 Plus
、
Kobra 2 Neo
、
Kobra 2 Pro
、
Kobra 2 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:1
/ 1h39m
109
Share
Description
I came across this great bottle opener, but I wanted the handles to be wider and easier to print. This device works on a good range of bottle cap sizes. PETG is recommended since it will flex and return to its original shape after use.
PRINT SETTINGS
PETG preferred (let me know how it turns out if you try PLA or any other material)
Supports will be needed on the flat overhang.
Print with the wider more open side on top.
5 walls, 15% infill
outer walls first
avoid putting the seam in the teeth, ideally placed at the end of a handle
Tags
License
This remix is based on
https://makerworld.com/en/models/427574?designId=427574#profileId-623471
Comments & Ratings
Here is empty
Remixes
