Buck
1
The Model is 200x200mm in size. You can change X and Y but Z must remain the same.
You may print at higher layer heights below the Min Depth of 0.48mm
Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments. Substitute as needed.
Swap Instructions:
Start with Beige
At layer #9 (0.8mm) swap to Brown
At layer #12 (1.04mm) swap to Dark Brown
At layer #15 (1.28mm) swap to Black
At layer #20 (1.68mm) swap to Blue Gray
At layer #23 (1.92mm) swap to Jade White for the rest.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
