COMPACT WMP 171 - Wiimote & Nunchuck holder

I got a request for a smaller Wiimote & Nunchuck holder that would fit on a A1 Mini bed.

So the minimum print bed size required is 171x171mm with the model at a 45 degree angle.

If your printing on a small bed like the A1 Mini, try to push the front end of the model as close to that corner as you can so the backend is further away from the plates edge.

I test printed on an A1 Mini with a 0.2 layer height, 5% rectilinear infill using basic black PLA and white PETG. I also used a smooth bed. If you have a textured bed you might want a brim, it's up to you.

Even if you don't have a small bed, it will save some material and time :)

--PATREON & PATREON SHOP.

--https://www.patreon.com/3DFreeman

Thanks for your continued support!