2026-02-06 06:41:57
985
30
CPAP (ResMed) Tube Bed Holder
@GR3D_2906535
Donate
Message
Follow
Recommended printing method
+ Frequently Used Printer
5
Share
Description
The 3mf file contains the optimal settings and support locations to avoid damaging the threads and support key areas based on numerous print tests.
Manual settings:
- Material - PETG
- Perimeters - 3
- Fill for all parts except the screw - 20%
- Fill for the screw - 35%
- Layer height - 0.16
- Supports - enabled
Manual adjustment of support locks:
Manual adjustment of supports:
Dimensions of the stand:
The 3mf file contains these settings. Enjoy!
P.S
If you need a wider version of the bed frame holder, please leave a comment and I will create a version tailored to your construction board. If there is anything I can improve or correct, please also let me know in the comments.
3.04.2026 Update
New Screw with 40mm thread!
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
