Calibration Tool - CaliBox of horrors

This is my go-to calibration print for checking everything at once. 

After some testing with friends, I realized I needed to share this model, as it is really fun and challenging to print. 

If you want to test your profiles and printer then this is the Test for you. 

This Calibration Print tests the following

• Curves (wall and top curves) - Orange
• Pressure Advance (corners) - Pink
• OverHangs - Green
• Top Surface - Light Blue
• Bridges - Purple
• Arches - Red
• Bed Adhesion - No color needed
• Cooling - Dark Blue.
• Dimensional - Yellow
•  

Bridges - 1mm thick in x,y, and both diagonal directions to test your cooling and bridging from all angles

Cooling - For ABS less cooling stops curling on the tips. PLA and PetG will need more cooling to fix the curling up.

Dimensional - the Base block is 20x20mm and the top notches (yellow) are 40x40mm

 Recommended settings

• 3 walls
• 0.2 layer height
• 0.4 - 0.5 wall thickness
• 5 top layers
• 4 bot layers