Camp Nou (Hueforge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x200mm in size

 You may print at higher layer heights below the Min Depth of 0.24mm

 The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:

PLA Overture Matte Black Transmission Distance: 0.1

PLA Paramount 3D Great Depression Jadeite Green Transmission Distance: 3

PLA Protopasta Dusty Smoke Transmission Distance: 20

PLA Overture White Transmission Distance: 4.4

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #10 (0.88mm) swap to Great Depression Jadeite Green

At layer #11 (0.96mm) swap to Dusty Smoke

At layer #16 (1.36mm) swap to White for the rest.