2026-09-12 17:02:29
242
12
Chair Leg Cap
@schuetzi99_4394914
Donate
Message
Follow
Recommended printing method
Add
stuhlfuss_anycubic
Kobra X
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 1h3m
1
Share
Description
This chair leg cap is designed for chair legs made of 16 mm round steel tubing. Its unique design feature is that the load is distributed across a 24 mm washer, preventing the steel tubing from cutting through the plastic. The tubing rests directly on this washer.
You’ll need one 8.4 x 24, 2 mm-thick washer for each leg. This washer is inserted during printing. To do this, you’ll need to insert a pause in the slicer before printing the top layer.
I recommend 6 shells and 100% infill. I used PETG.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
