Charizard with Flame Base – Detailed 3D Printable Figure
Bring the iconic Fire-type Pokémon Charizard to life on your desk or shelf! This highly detailed model features Charizard in an aggressive, dynamic pose standing atop a stylized rock base with erupting magma and flame effects.
Designed with FDM 3D printing in mind, this piece captures the classic features—including the roaring mouth, fierce eyes, fiery tail, and sweeping wings—making it a perfect project for Bambu Lab printers or any standard desktop 3D printer.
KEY FEATURES
- Iconic Design: Faithfully recreates Charizard's classic look and sharp features.
- Thematic Base: Includes a custom cracked-rock magma base that gives the figure stability and dramatic flare.
- FDM & AMS/Multicolor Ready: Scaled and designed to work cleanly with single-color printing (for painting) or multi-material systems like Bambu AMS.
RECOMMENDED PRINT SETTINGS
- Layer Height: 0.12mm - 0.16mm (0.12mm recommended for smooth curves and facial detail).
- Wall Loops / Perimeters: 3
- Infill: 15% - 20% (Gyroid or Grid pattern).
- Supports: Tree / Organic Supports enabled. Needed under the wingtips, claws, upper teeth, and tail flame overhangs.
- Orientation: Print flat with the bottom of the base resting directly on the build plate.
- Brim: Outer brim recommended if build plate adhesion is a concern.
POST-PROCESSING & FINISHING
- Assembly: Single-piece print, no glue or complex assembly required!
- Painting: Looks fantastic straight off the print bed in orange/teal/yellow PLA, or prime with light gray primer for acrylic painting and dry brushing.
