Charizard Hueforge - Pokemon

Projet: Dracaufeu.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 189.89x235mm in size

You may print at higher layer heights below the Base Thickness of 1.28mm

The Max allowed Thickness is 3.44mm and the Actual Thickness is 3.44mm

Filaments utilisés: 

    PLA BambuLab Basic Black Transmission Distance: 0.6

    PLA BambuLab Matte Ice Blue Transmission Distance: 3.5

    PLA BambuLab Basic Red Transmission Distance: 4

    PLA BambuLab Basic Yellow Transmission Distance: 5.5

    PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 5 unique filaments

Instructions de changements:

    Commencer par Black

    At layer #19 (1.6mm) swap to Ice Blue

    At layer #21 (1.76mm) swap to Black

    At layer #22 (1.84mm) swap to Red

    At layer #27 (2.24mm) swap to Yellow

    At layer #29 (2.4mm) swap to Jade White

    At layer #31 (2.56mm) swap to Yellow

    At layer #32 (2.64mm) swap to Ice Blue

    At layer #35 (2.88mm) swap to Jade White pour le reste.