0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-08-27 00:18:50
310
20
Report

Charon HueForge

@fD667_1053716
Message
Follow
Recommended printing method
Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.


The Model is 150x200mm in size. You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct.

You may print at higher layer heights below the Base Thickness of 0.48mm. The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm.


It is possible to print without material system by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.


Filaments Used:

PLA Anycubic Black Transmission Distance: 0.3

PLA BambuLab Basic Blue Gray Transmission Distance: 3

PLA BambuLab Matte Ash Gray Transmission Distance: 1.5

PLA BambuLab Basic Beige Transmission Distance: 8

PLA BambuLab Matte Ivory White Transmission Distance: 3.5

This print uses 5 unique filaments


Swap Instructions:

Start with Black

At layer #13 (1.12mm) swap to Blue Gray

At layer #17 (1.44mm) swap to Ash Gray

At layer #18 (1.52mm) swap to Beige

At layer #19 (1.6mm) swap to Ivory White for the rest.


Tags
charon
light
hueforge
river
water
ship
dark
horror
decoration
decor
wall
walldecor
wallart
homedecor
antik
3dart
3d
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.