Chibi Iron Man Action Figure – Articulated Display Model with Flame Effects Base

Bring the iconic armored Avenger to your desk with this highly detailed, chibi-style **Iron Man Display Model**! Designed with a balance of heroic proportions and compact chibi aesthetics, this model captures Iron Man mid-takeoff featuring dynamic flame blast effects attached to a stylized industrial pedestal base.

#### **Key Features:**

* **Chibi Stylized Design:** Crisp armor paneling, iconic red-and-gold color scheme, and an oversized helmet structure that pops on any desk or shelf.

* **Dynamic Flame Base:** Features translucent or bright orange/yellow thruster flames lifting the figure off a tech-patterned display stand.

* **FDM-Optimized:** Modeled specifically for clean, horizontal FDM layer printing with minimal supports needed on key overhangs.

* **Multi-Color Ready:** Designed to work smoothly with multi-material systems (like AMS) for easy multi-color prints without manual painting.

#### **Recommended Print Settings:**

* **Layer Height:** 0.12mm - 0.16mm (for smooth surface detail and clean layer lines)

* **Infill:** 15% – 20% (Grid or Gyroid recommended)

* **Supports:** Tree supports enabled (only required under chin, hands, and base overhangs)

* **Walls/Perimeters:** 3 walls for durability

* **Material Recommendations:**

* Body: Red PLA, Gold PLA, Silver/Grey PLA

* Base: Dark Grey / Matte Black PLA

* Flames: Translucent Orange/Yellow PLA for best light transmission

#### **Assembly Instructions:**

1. Print the individual components (Iron Man figure, flame jets, and base plate) or use the pre-painted AMS multi-color print profile.

2. Snap or press-fit the flame effects into the central slots on the grey base.

3. Secure the figure onto the flame posts (a drop of superglue can be used for extra stability if desired).