Chibi Pumpkin Trickster
Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.
You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.
Small in size, big on mischief! This chibi pumpkin monster brings Halloween personality with an oversized jack-o’-lantern head, slanted eyes, and a cheeky grin featuring two chunky teeth.
Dressed in overalls with a front pocket, rolled cuffs, and sturdy boots, this little rascal stands proudly with both hands on his hips. Deep pumpkin grooves and a short, crooked stem complete his playful, spooky look.
A fun addition to a Halloween shelf, desk, or seasonal display. Print him in a single colour to highlight the sculpted shapes, or paint his pumpkin head and outfit for a colourful finish.
Designed for FDM printing with supports.
Guide
Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:
1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.
Recommendations Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.
- Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.
- Recommendations:
- 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
- PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.
- Clean the plate thoroughly before printing.
- Make sure the filament is dry and free from dirt. This can damage the print or weaken the support
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
