2025-11-28 00:39:44
3.5k
346
Christmas Tree
@Gettone_1999008
Donate
Message
Follow
Recommended printing method
Add
Christmas tree
Kobra S1
Kobra S1 Max
、
Kobra 3
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
/ Plates:1
/ 4h58m
43
Share
Description
Christmas tree with a light compartment in the base. As you can see from the photos, I carved the light control housing into the base so it's a single piece, allowing us to position it wherever we want without any issues. On the back, I drilled a hole where I can use a pin to remove the control when changing the batteries.
The star is very small, so be careful when removing the supports, as you might break the pins.
For the lights I used, I'll leave you the link to purchase them.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
