0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2024-05-19 13:00:56
2.6k
168
Report

Clicky Macaron Spinner

@SotaSato_1477861
Message
Follow
Recommended printing method
Description

This is a fidget toy with a macaron appearance, and the cream filling clicky rotates. It provides a soft-click sensation and can be rotated with just the fingertips of one hand.

Customizable click feeling and case design you can choose from:

  • Two types of wheels - normal or stiff (I recommend normal)
  • Two types of case design - regular or for keychain

Assembly:

  1. Put the “spring” onto the “caseM” part.

2. Apply a very small amount of PTFE grease or similar to the inside of the “wheel” part.

3. Put the “wheel” on step 1 caseM.

4. Align the notches on both cases and snap-on the opposite side of the case. If printed with a properly calibrated printer, it should be possible to hold and smoothly rotate with the index and middle fingers.

Notes:

  • Recommended layer height: 0.15 - 0.20mm, In my case with slicer, layer heights above 0.28mm, the spring, wheel clearance lost are do not function.
  • This model may not achieve smooth rotation unless grease is applied to the inside of the wheel.
  • Do not use Matte PLA, Silk PLA, as they have weak layer adhesion and can break with snap-on.
Tags
fidgetclicker
fidgettoy
License
This remix is based on