2025-10-03 21:42:41
592
1
Clip-on Stand for Swatch Display Board by Bambu Lab (print in place)
@theKitCardGuy_3114481
Donate
Message
Follow
Recommended printing method
Add
0.2mm layer, 3 walls, 20% infill
Anycubic Kobra 1
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 2 Plus
、
Kobra 2 Neo
、
Kobra 2 Pro
、
Kobra 2 Max
、
Kobra 3 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:1
/ 13m
15
Share
Description
Summary
This is a print-in-place attachable stand for the Swatch Display Board - a great tool to keep track of all the filaments!
You can find matching filament swatches here.
- Layer Height: 0.2 mm
- Infill: 15–20% (Grid or Gyroid)
- Perimeters/Walls: 3
- No supports!
- Print Orientation: as in the file
Installation
Carefully loosen the stand leg and fold it out. Now attach it to the back of the display and press firmly until it clicks into place. Done!
PS: If it is loose, use a drop of superglue if necessary.
Do you like my work? I would be very happy if you would support my work on Ko-fi.
Tags
License
Comments & Ratings
Here is empty
Remixes
